Super Glue For TPU Tray To Leather Case

Super Glue Adhesive For TPU Tray to Leather Case

Quick Details

CAS No.: 7085-85-0

Other Names: Super Glue,Instant glue,502 glue

MF: C6H7NO2

EINECS No.: 230-391-5

Place of Origin: China (Mainland)

Classification: Other Adhesives

Main Raw Material: cyanoacrylate, Acrylic

Usage: Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking

Packaging & Delivery

Packaging Details: 50cards/ctn

Delivery Time: 35days after received the deposit

Product Description

APPLICATION.

1.Super glue,cyanoacrylate adhesive,has an amazing new quick binding power of multi-purpose against wood,plastic,

ceramic,rubber,metal ect...

2.Bonds daily domestic goods,interior goods,electric appliance,accessories,hobbies and sporting goods,automobile

accessories.

CARE IN HANDING.

1.Do not spread or touch the adhesive with the finger.When carelessly touched,rub the handcream and soften with warm water,so it can be easily removed.

2.If eye contact occurs,flush with water,and consult with doctor.Neither use any solvents or rub the eye.

3.Due to immediate bonding, keep out of reach of children.

CARE ON USE.

1.Do not use super glue on to the polyethylene,fluorocarbon and silicon materials.Wipe with alcohols or sandpaper the

contact surface to remove moisture,rust,oil and fat ect...

2.Give a slight moisture onto the wild surface when diffcult to bond.

How to use?

1.Set the cap ring onto the screw as illustrated.Hold the cap and nozzle with left hand,and screw the tube with right hand

slowly clockwise,then the contects come out from the tip.

2.After use,wipe the nozzle tip with soft paper.Tight cap and store.

3.When clogged at the noxxle top,on next use,cut the extender nozzle and tight cap with one of the sutiable holes.

FAQ

1Q:How do I use AVATAR Super Glue?
A:AVATAR Super Glue is easy to use. It dries in 15-30 seconds and no clamps are needed. Simply clean the surfaces of your project to rid of dirt, dust and grease. Apply a small amount of AVATAR Super Glue (more isn't always the better: use 1 drop per square inch). Then put your pieces together and hold for 15-30 seconds.
You can handle your project lightly after 1-5 minutes. 24 hours required for complete cure.

2Q:Can I use AVATAR Super Glue on paper?
A:Yes, it will work on paper. Only apply a small amount. It is not acid free, therefore, not recommended for scrapbooking.

3Q:Is AVATAR Super Glue heat and water resistant?
A:AVATAR Super Glue works well up to temperatures as high as 80°C. However, too much exposure to extreme heat will cause the strength of the bond to be compromised. Likewise, too much exposure to water, especially warm water, can compromise the strength of the bond.

4Q:Can AVATAR Super Glue withstand extreme cold temperatures?
A:AVATAR Super Glue can typically be exposed to temperatures ranging from -30-80°C without breaking down.
However, there can be variation to this range due to the way different substrates expand and contract in extreme temperatures.

5Q:How do I remove from my skin or my project?
A:To remove AVATAR Super Glue from your skin, soak the bonded area in warm soapy water or acetone (finger nail polish remover works well). The key is to be patient and NEVER pull the area apart.
Gently wiggle the area to allow the soapy water or acetone to penetrate the bond. After soaking, the adhesive should come off easily. Keep in mind acetone can strip your skin of oils, so apply moisturizer after removal.
To remove AVATAR Super Glue from the surface of your project, soak bonded area with warm soapy water or acetone. Keep in mind, acetone can mar the surface material or discolor fabric.

11Q: Still not familiar with my factory ?

A:If you are doubt about my company , you can vist our factory, I will prepare everything for you , such as booked the hotel , picked up you, just don't worry about it . Call me if needed help